ون جيان
يمكن استخدام تركيب السيور الناقلة في الحياة اليومية والمجالات الصناعية المختلفة, and its application scale is very wide.
1. Put a flexible rolling shaft on the conveyor belt winding core, and roll the belt up. Before putting it on the rack, pay attention to the direction of the upper and lower cover rubbers.
2. In the workplace where it is not suitable for racking, the conveyor belt can be unrolled, and the conveyor belt at the folding part has a large enough curvature radius to avoid damaging the conveyor belt. It is forbidden to place heavy objects on the conveyor belt at the folding part.
3. If the conveyor belt is replaced, the new belt can be connected with the old belt, and the belt can be unloaded and installed at the same time.
4. For horizontal conveyors, the old conveyor can be cut off at any point. For conveyors working in a skewed direction, the cutting point needs to be selected to avoid losing control due to sliding due to self-weight.
5. After the new belt is positioned correctly on the conveyor, fix one end of the belt with a clamp, then connect it to the rope that passes around the roller and the pulley, and balance the conveyor belt on the conveyor through the traction installation. When traction, avoid the conveyor belt and the frame from squeezing each other.
6. Fix one end of the conveyor belt on the conveyor frame with a clamp, and tighten the other end through the pulley until the conveyor belt does not sag significantly on the return roller.
7. Fix the tensioning installation 100~150mm away from the starting point.
Thanks