How to improve the working efficiency of heat-resistant conveyor belts

1. According to the design regulations of the conveyor, the relationship between the diameter of the conveyor belt drive roller and the conveyor belt cloth layer, the matching of the drive roller and the redirecting roller, and the requirements of the roller groove angle should be reasonably selected.

2. The feeding direction should be along the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt when it falls, a chute should be used to reduce the material drop distance; in the receiving section of the conveyor belt, the roller spacing should be shortened, and a buffer roller should be used to prevent leakage. The conveyor belt should be used along the use of a moderately soft and hard baffle to prevent the baffle from being too hard and scratching the conveyor belt surface.

3. Prevent the conveyor belt from starting with load.

4. When the conveyor belt deviates, timely measures should be taken to correct it.

5. Conveyor belts of different types and specifications shall not be connected together for use. The joint is best made by gluing.

6. The type, structure, specification, and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.

7. The conveyor belt running speed should generally not exceed 2.5m/s. Large-block, abrasive materials and unloading devices using fixed pears should be operated at low speed as much as possible.

8. During the use of the conveyor, if there are missing rollers, they should be added and repaired in time; the rollers are covered by materials, causing poor rotation. To prevent leakage from getting stuck between the rollers and the belt, pay attention to the lubrication of the moving parts of the conveyor belt, but do not oil the conveyor belt.

9. Avoid the conveyor belt from being stuck by the frame, pillars or block materials to prevent breakage and tearing. When the conveyor belt is found to be partially damaged, it should be repaired with artificial cotton in time to avoid expansion.