ウェンジャン
http://The way the conveyor belt is connected
The conveyor belt needs to connect the two ends to be able to work normally.Now talk about some connection methods.
1:With belt buckle connection,suitable for the thickness of less than 1cm conveyor belt.
2:Stick with glue, spread and polish the cloth layer inside the conveyor belt, apply special glue,and use smaller nails to assist the connection.
3:Vulcanization joint, the conveyor belt inside the cloth layer or steel wire in proportion to push and polish, covered with special film, vulcanization machine on the joint for pressure, heating ,so that it to meet the use of standards.
Belt buckle and glue adhesion two ways, is the conveyor belt used in the early connection, its own limitations are larger. Vulcanized joint through special treatment, can make the conveyor belt closely fit, improve the use time of the conveyor belt, reduce the failure rate of conveyor work.