เหวินเจี้ยน
Highly wear-resistant conveyor belts generally have a nylon cloth layer inside and a rubber covering layer outside. The inner nylon cloth layer provides tensile force, and the outer rubber is specially treated to have ultra-high wear resistance, which greatly reduces the wear rate of the conveyor belt caused by minerals and increases the use time.
| Parameters of High Wear-resistant Conveyor Belt | |||||||
| Type of Fabric | Fabric Model | Single Stretch Strength | Canvas Layer | Lid Thickness（mm） | Belt Width（mm） | Conveyor Belt Type | |
| Top Cover | Lower Cover | ||||||
| EP Fabric | EP-100 | 100 | 2-8
Recommend not to be more than 6 layers |
2-25 | 0-15 | 500-2200 | Anti-impact type,
Wear resistance, Heat resistance, Flame retardant, ฯลฯ. |
| EP-125 | 125 | ||||||
| EP-150 | 150 | ||||||
| EP-200 | 200 | ||||||
| EP-250 | 250 | ||||||
| EP-300 | 300 | ||||||
| EP-350 | 350 | ||||||
| EP-400 | 400 | ||||||
| EP-500 | 500 | ||||||
| EP-600 | 600 | ||||||
| NN Fabric | NN-100 | 100 | 2-10
Recommend not to be more than 8 layers |
2-25 | 0-15 | 500-2200 | |
| NN-125 | 125 | ||||||
| NN-150 | 150 | ||||||
| NN-200 | 200 | ||||||
| NN-250 | 250 | ||||||
| NN-300 | 300 | ||||||
| NN-400 | 400 | ||||||
| NN-500 | 500 | ||||||
| Cover Layer Performance | |||||||
| Performance | Tensile Strength/Mpa | Elongation at Break/% | Grinding Rate/mm3 | ||||
| H | 24 | 450 | 120 | ||||
| ดี | 18 | 400 | 100 | ||||
| M | 15 | 350 | 200 | ||||
| H：Used to transport sharply abrasive materials that have strong damage to the band；ดี：Used to transport high -wear materials；M：Used to convey moderate abrasion material | |||||||
